This auger drills holes much more quickly than digging with a shovel and has over 6000 5-star reviews
This auger drill bit is a dream for digging small holes for bulbs, herbs, transplants, and small perennials.
Using an auger for planting bulbs is an efficient way to speed up the process, especially if you're planting a large number of bulbs. Augers attach to a power drill and can quickly dig consistent holes to the right depth, saving you time and effort compared to using a hand trowel or shovel.
To use an auger for planting bulbs:
- Select the Right Auger: Choose an auger with a diameter that matches the size of your bulbs (typically 1-2 inches for standard bulbs) and with enough length to reach the appropriate planting depth (usually 6-8 inches). We recommend this one. Only $12.97 right now and it is the #1 best seller in augers and posthole diggers on Amazon. The 16.5 inch length of this drill allows you to drill while standing.
- Prepare Your Drill: Use a cordless drill with sufficient power (18V or larger) to handle the auger, and ensure it has a fully charged battery. Set the drill to a low or medium speed to maintain control while drilling.
- Mark Spacing: Mark out where you want to plant the bulbs to ensure even spacing and avoid overcrowding. A small dot of neon spray paint marking where you want your holes makes it easier.
- Drill the Holes: Holding the auger vertically, press it into the soil and slowly start the drill, allowing the auger to dig to the desired depth. Pull the auger out carefully to avoid flinging soil around the garden bed.
- Plant Bulbs and Cover: Place the bulbs in the holes with the pointed end up, cover them with soil, and gently pat down. Water the area well to help the bulbs settle in.
Using an auger makes the process quick, especially when planting dozens or even hundreds of bulbs, and it can be especially helpful in tough or clay soil where digging by hand might be more difficult.